Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272

+886-6-295-8228

Fastener trading & sourcing/Tainan, Taiwan/Est. 2007

Special fasteners to your drawing, sourced from the right maker in Taiwan.

There are more than 1,700 fastener manufacturers in Taiwan. We know which supplier suits you best. Way Fast is a dedicated fastener trader and exporter — no factory of our own, but qualified manufacturing partners, managed quality and submission-grade documentation.

  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH

Or write to [email protected] · +886-6-295-8228

Start a request for quotation

    Nothing is sent yet — you review everything on the next page. Quotation within 7–14 business days from receipt of drawing and specifications.

    Quality system
    ISO 9001:2015BSI certificate No. FS 571272
    Documentation
    PPAP Levels 1–3IMDS · RoHS / REACH
    Quotation
    7–14 business daysfrom drawing and specifications
    General range
    M2–M30 · 6–200 mmsteel, stainless, aluminium, copper / brass
    Catalogue
    34 productscustom and special parts to drawing

    Featured product groups

    4 groups/All 34 products

    Torx-drive screws in pan, flange and washer-head styles, black and zinc finishes
    Fig. 1Torx® drive — assorted head styles, sizes and finishes

    A Licensed / patented fasteners

    Six licensed families, supplied through licensed manufacturers.

    Drive systems, thread-forming screws for plastics, metal and magnesium, anti-cross-threading fasteners and clinch studs — produced by manufacturers licensed by Acument®, EJOT®, REMINC and MAThread, Inc.

    Families
    6
    Sizes, Torx®
    M1 – M30 · #0 – 1 1/4"
    Documentation
    PPAP L1–3 · IMDS · RoHS / REACH

    B Nuts

    Special nuts in plain and zinc finishes: sleeve nuts, round and flanged nuts, a winged nut and a knurled flange nut
    Fig. 2Special nuts — turned and formed shapes

    Non-standard and custom-geometry nuts

    Special nuts to drawing — cold-headed, hot-forged, turned and stamped — plus lock, weld, blind rivet, flange and conical nuts.

    Sizes
    M3 – M30 · #4 – 1-1/4"
    Processes
    Cold-heading, hot-forging, CNC turning, stamping
    Also
    Lock, weld, blind rivet, hex flange, conical nuts
    View group

    C Washers, rings & seals

    Sealing washers with metal faces bonded to black or grey rubber, in flat and domed shapes
    Fig. 3Bonded sealing washers — flat and domed

    Flat, spring, bonded and rubber washers

    Flat, spring and conical washers, bonded and rubber sealing washers, retaining rings, rubber and plastic components.

    Washers
    M1.6 – M30 washer ID · #0 – 1-1/4" · per DIN / ISO / JIS standard or customer print
    Bonded
    M3 – M16 bolt size · #5 – 5/8"
    Also
    Retaining rings, rubber and plastic components
    View group

    D Turned & formed parts

    Turned parts in polished steel, aluminium and brass: fittings, nozzles, threaded sleeves and connectors
    Fig. 4Turned fittings, nozzles and connectors

    Precision CNC-turned parts

    CNC-turned parts to drawing, dowel pins, brass inserts, die-cast and powder-metal parts, rivets and steel beads.

    Range
    0.5 – 250 mm diameter · 0.020" – 10"
    Material
    Carbon steel, alloy steel (heat-treatable grades), stainless steel (304 / 316 / 17-4…
    Also
    Dowel pins, brass inserts, die-cast and powder-metal parts, rivets
    View group

    Product video

    Licensed fasteners

    A short product introduction from the Way Fast YouTube channel.

    All product videos

    Video 1Licensed fastenersYouTube

    Licensed fastener families

    6 families/4 licensors

    Way Fast is a supplier, not a licensor. Every part in these families is produced by a manufacturer holding the licence for it.

    We work with multiple licensed manufacturing partners and match each order to the best-fit production line — stabilizing lead times and cost when single-source capacity tightens.

    1. A.1 Torx-drive screws in pan, flange and washer-head styles, black and zinc finishes

      Torx® · Torx Plus® · Autosert®

      TypeDrive systems for threaded fasteners

      LicensorAcument®

      SizesM1 – M30 · #0 – 1 1/4"

      The full Acument® Torx drive family — licensed recess geometries for threaded fasteners across metal assembly applications.

    2. A.2 Thread-forming screws for plastics with widely spaced threads, zinc and black finishes, from miniature to long sizes

      Delta PT® · Duro PT® · PT®

      TypeThread-forming screws for plastics

      LicensorEJOT®

      SizesM1 – M16 · #0 – 5/8"

      The full EJOT® PT family — thread-forming screws engineered for direct assembly into thermoplastic and thermoset substrates.

    3. A.3 Black and grey-coated thread-forming screws with flange, hex and washer heads, standing on their heads

      Taptite II® · Taptite 2000® · Duo-Taptite® · Remform® · Plastite® · Kleerlok® · Powerlok®

      TypeThread-forming screws

      LicensorResearch Engineering & Manufacturing, Inc. (REMINC)

      SizesM2 – M16 · #2 – 5/8"

      The full Taptite® portfolio — trilobular and specialty thread-forming screws licensed by Research Engineering & Manufacturing, Inc. (REMINC).

    4. A.4 Close-up of black and silver-grey flange bolts arranged in a circle, showing the reduced lead-in points at the thread ends

      MAThread® · MATpoint®

      TypeAnti-cross-threading fasteners

      LicensorMAThread, Inc.

      SizesM3 – M30 · #5 – 1 1/4"

      The MAThread® family — licensed anti-cross-threading fasteners with lead-thread geometry that straightens misaligned engagement before first thread lock.

    5. A.5 Close-up of black and zinc-plated thread-forming screws arranged in a circle with the thread ends toward the centre

      Magform®

      TypeThread-forming for magnesium

      LicensorAcument®

      SizesM3 – M12 · #5 – 1/2"

      Licensed thread-forming fastener for magnesium die-cast components — 105° thread geometry forms strong threads via compressive action without cutting or debris.

    6. A.6 Close-up of five clinch studs in black, yellow-zinc and zinc finishes, showing the ribbed underside of the heads

      Strux®

      TypeClinch studs for non-weldable assemblies

      LicensorAcument®

      SizesM3 – M30 · #5 – 1 1/4"

      Licensed clinch stud — displacement-collar geometry locks the stud into sheet material without welding, staking, or pre-drilled threads.

    Trademark notice Torx®, Torx Plus®, Autosert®, Magform® and Strux® are registered trademarks of Acument®. Delta PT®, Duro PT® and PT® are registered trademarks of EJOT®. Taptite II®, Taptite 2000®, Duo-Taptite®, Remform®, Plastite®, Kleerlok® and Powerlok® are registered trademarks of Research Engineering & Manufacturing Inc. MAThread® and MATpoint® are registered trademarks of MAThread, Inc. All trademarks belong to their respective owners. Way Fast supplies these products through licensed manufacturers and is not the owner, licensor or licensee of these marks.

    Why source through Way Fast

    Quality & compliance

    We serve Tier 1 and Tier 2 automotive suppliers — primarily to North American OEM programs, including platforms shared with European and Japanese brands — with day-to-day experience handling the documentation and tolerance standards these projects demand.

    Way Fast holds ISO 9001:2015 certification from BSI (certificate No. FS 571272). On request, parts are sent to an independent A2LA-accredited laboratory.

    1. 01

      Multi-source capacity

      Several qualified makers per part family

      Working with multiple qualified manufacturing partners — we match each order to the best-fit production line, stabilizing lead times and cost when single-source capacity tightens.

    2. 02

      Submission-grade documentation

      PPAP Levels 1–3 · IMDS · RoHS / REACH

      Full support for PPAP (Levels 1–3), IMDS submission, and RoHS / REACH documentation.

    3. 03

      Audited special-process chain

      CQI-9 · CQI-11 · CQI-12 partners

      Partners certified to AIAG CQI-9 (heat treat), CQI-11 (plating), and CQI-12 (coating) — covering the full post-processing chain under audited special-process controls.

    4. 04

      Multilingual drawing review

      English · German · Japanese · Chinese

      Technical drawing review in English, German, Japanese, and Chinese — including ISO 8015 GPS callouts, JIS standards, thread tolerance classes, and coating specifications.

    How sourcing with Way Fast works

    6 steps/drawing to shipment

    1. 1

      Send drawing

      Drawing, print or part reference, plus quantity. Over 95% of our communication is by e-mail.

    2. 2

      Review & matching

      Drawing review, then matching to the best-fit manufacturer(s) among our partners in Taiwan.

    3. 3

      Quotation

      Within 7–14 business days from receipt of drawing and specifications.

    4. 4

      Samples & documents

      Samples with PPAP / IMDS / RoHS documentation as required. Schedules issued per project.

    5. 5

      Production

      Partners certified to CQI-9, CQI-11 and CQI-12 for heat treatment, plating and coating. Optional third-party laboratory test.

    6. 6

      Shipment

      Shipment from Taiwan and continued support for the running programme.

    More Working with Way Fast explains the trading model and answers common questions. New to fastener production? Read the guide Fastener manufacturing process, also available in Chinese: 螺絲製程.

    Latest articles

    Company News/Industry Insights/Manufacturing/Product Highlight

    1. Industry Insights · Manufacturing螺絲產業高值化牽手高品質台灣是全球主要的螺絲生產與出口國之一,素有「螺絲王國」之稱。多年來,台灣廠商憑藉穩定的品質與大量生產能力,在國際市場上佔有一席之地。為了維持產業的優勢,我司記錄一次的所見所聞,期許各廠商能朝向高值化及高質化產品發展。中文
    2. Industry Insights螺絲產業2025新契機?新挑戰?2025年6月3日,美國總統簽署第10947號公告(Proclamation 10947),宣布自2025年6月4日起,將鋼鐵及鋁製品的進口關稅從現行25%大幅調升至50%,對包括台灣在內的全球鋼鐵扣件出口商造成重大衝擊。中文
    3. Product HighlightSTRUX® Nuts and Studs: Materials, Finishes and DimensionsSTRUX® fasteners are high-performance clinch STRUX® studs and STRUX® nuts designed to offer stronger and more reliable assemblies compared to traditional fastening…EN
    4. Product HighlightDelta PT® Screws: Head Styles, Drives, Materials and FinishesDelta PT® screws are specially designed for fastening thermoplastics and other materials, offering superior performance.EN
    5. Company NewsVisiting SHEH FUNG SCREWS: A Productive ExperienceWe recently had the privilege of visiting SHEH FUNG SCREWS, a company renowned for its leadership in Taiwan's construction fastener industry. Their products are not…EN

    All articles

    Request for quotation

    Send your drawing, print or part reference.

    Add the quantity you need. We review it, match it to the best-fit manufacturer and return a quotation — within 7–14 business days from receipt of drawing and specifications.

    Request a quote
    • Quote in 7–14 business days
    • ISO 9001:2015
    • PPAP L1–3
    • IMDS
    • RoHS / REACH

    Prefer e-mail or phone? [email protected] · +886-6-295-8228

    Request a quote

    Inquiry list 0

    No products on your list yet.

    Add products from the catalogue to request them together — or send a drawing or part reference without choosing a product.

    Browse 34 products

    0 items
    Request a quote

    Quotation within 7–14 business days from receipt of drawing and specifications. ISO 9001:2015 · PPAP Levels 1–3 · IMDS · RoHS / REACH.