Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272

+886-6-295-8228
DocumentProduct sheet GroupE · Screws, bolts & studs ItemE.1 of 12 Path/product/sems/

SEMS machine screws with captive washer pre-assembled

SEMS Machine Screws

Screw-and-washer assemblies — machine screws shipped with one or more captive washers pre-assembled under the head. Eliminates separate washer handling and guarantees the washer is always installed, even on high-volume automated lines.

Selected across automotive electronic modules, ECU enclosures, harness brackets, dashboard components, and mixed-material joints where a specific washer type — flat, tooth-lock, or split-lock — is required without risk of loss or substitution on the line.

Specification summary

Size range
M1.4 – M20 · #0 – 3/4"
Materials
Carbon steel, alloy steel, stainless steel, or brass — or to customer specification.
Finishes
Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, or to customer specification.

Summary of the range stated on this page. Parts are produced to customer drawing or standard — full specifications.

Assorted screws and bolts with captive flat, toothed and spring washers in zinc, grey, yellow, green and black finishes
Fig. 1SEMS — screws with pre-assembled captive washers

Catalogue photographs at native size. Parts shown are examples; all production is to customer drawing.

Specifications

Range
SizesM1.4 – M20 · #0 – 3/4"
Lengths3 – 120 mm · 1/8" – 4 3/4"
MaterialCarbon steel, alloy steel, stainless steel, or brass — or to customer specification.
FinishesZinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, or to customer specification.
Head typesPan, flat, hex washer, cheese, or per drawing.
DrivePhillips, Pozidriv, Torx®, slotted, hex socket, or per drawing.

Also known asSEMS, SEMS screw, SEMS machine screw, screw and washer assembly

Selecting across SEMS washer configurations

Family coverage · 4 forms
  1. 2.1

    Plain / Flat

    Most common · bearing distribution

    Flat washer captive under the head — distributes clamp load and protects soft surfaces from indentation. Most common baseline SEMS configuration across automotive electronic assemblies, harness brackets, and industrial joints. Non-locking; paired with chemical thread-lock, lock nut, or prevailing-torque feature where retention is critical.

  2. 2.2

    External Tooth

    Anti-rotation · exposed teeth

    Teeth on the outer rim provide maximum grip against the mating surface and the largest torsional resistance. Selected where loosening under vibration is the primary concern and the joint tolerates visible tooth marks.

  3. 2.3

    Internal Tooth

    Concealed teeth · clean surface

    Teeth face inward — used where tooth marks must be hidden (visible assemblies, painted panels). Requires tight mating-hole diameter to prevent tooth miss-engagement.

  4. 2.4

    Split Lock (Helical Spring)

    High-vibration · spring tension

    Split-ring geometry provides spring tension against the joint. Selected where the assembly sees continuous low-amplitude vibration. Paired with carbon or hardened spring-steel washers.

Why source through Way Fast

For this product

Washer-to-application matching

Washer type, material, and size matched to substrate hardness, coating, torque spec, and vibration profile — drawing-reviewed against customer joint requirements and PPM target.

  1. 01Multi-source capacitySeveral qualified makers per part family
  2. 02Submission-grade documentationPPAP Levels 1–3 · IMDS · RoHS / REACH
  3. 03Audited special-process chainCQI-9 · CQI-11 · CQI-12 partners
  4. 04Multilingual drawing reviewEnglish · German · Japanese · Chinese

How Way Fast manages quality and documentation

Quotation, production and documentation

Lead times
Quotation
7–14 business daysfrom receipt of drawing and specifications.
Sample & production
Per projectSchedules issued per project.
Documentation
  • PPAP L1–3
  • IMDS
  • RoHS / REACH
On request: test by an independent A2LA-accredited laboratory.

Supplied through qualified manufacturing partners. PPAP / IMDS / RoHS / REACH documentation per customer program. Quality levels to 50 PPM standard; tighter levels (25 PPM) available on request.

Send your drawing, SEMS part reference, or assembly joint requirement with specified washer type and size. Request a quote

Washers & sealsC.1

Washer and Spring

Full-range washers and spring components — flat, spring-lock, conical, tooth-lock, cup, flange, finish washers, spring pins, and nut springs.

LicensedA.1

Torx® / Torx Plus®

The full Acument® Torx drive family — licensed recess geometries for threaded fasteners across metal assembly applications.

Screws, bolts & studsE.9

Tapping Screws

Self-tapping and thread-forming screws for sheet metal, plastic, and cast materials

Screws, bolts & studsE.7

Micro Screws

Sub-M2 precision screws — manufactured to thread tolerance classes below standard cold-heading output

All product families

Search all 34 products

Request a quote

Inquiry list 0

No products on your list yet.

Add products from the catalogue to request them together — or send a drawing or part reference without choosing a product.

Browse 34 products

0 items
Request a quote

Quotation within 7–14 business days from receipt of drawing and specifications. ISO 9001:2015 · PPAP Levels 1–3 · IMDS · RoHS / REACH.