Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272

+886-6-295-8228

Group A/6 products/Featured

Licensed fasteners

Drive systems, thread-forming screws for plastics, metal and magnesium, anti-cross-threading fasteners and clinch studs — produced by manufacturers licensed by Acument®, EJOT®, REMINC and MAThread, Inc.

Way Fast is a supplier, not a licensor. Every part in these families is produced by a manufacturer holding the licence for it. We work with multiple licensed manufacturing partners and match each order to the best-fit production line — stabilizing lead times and cost when single-source capacity tightens.

  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH
Torx-drive screws in pan, flange and washer-head styles, black and zinc finishes
Fig. 1Torx® drive — assorted head styles, sizes and finishes
Way Fast catalogue, page 4: licensed fasteners supplied by licensee manufacturers
Fig. 2Catalogue, p. 4 — licensed fasteners

The six licensed families

4 licensors

  1. A.1 Torx-drive screws in pan, flange and washer-head styles, black and zinc finishes

    Torx® · Torx Plus® · Autosert®

    TypeDrive systems for threaded fasteners

    LicensorAcument®

    SizesM1 – M30 · #0 – 1 1/4"

    The full Acument® Torx drive family — licensed recess geometries for threaded fasteners across metal assembly applications.

  2. A.2 Thread-forming screws for plastics with widely spaced threads, zinc and black finishes, from miniature to long sizes

    Delta PT® · Duro PT® · PT®

    TypeThread-forming screws for plastics

    LicensorEJOT®

    SizesM1 – M16 · #0 – 5/8"

    The full EJOT® PT family — thread-forming screws engineered for direct assembly into thermoplastic and thermoset substrates.

  3. A.3 Black and grey-coated thread-forming screws with flange, hex and washer heads, standing on their heads

    Taptite II® · Taptite 2000® · Duo-Taptite® · Remform® · Plastite® · Kleerlok® · Powerlok®

    TypeThread-forming screws

    LicensorResearch Engineering & Manufacturing, Inc. (REMINC)

    SizesM2 – M16 · #2 – 5/8"

    The full Taptite® portfolio — trilobular and specialty thread-forming screws licensed by Research Engineering & Manufacturing, Inc. (REMINC).

  4. A.4 Close-up of black and silver-grey flange bolts arranged in a circle, showing the reduced lead-in points at the thread ends

    MAThread® · MATpoint®

    TypeAnti-cross-threading fasteners

    LicensorMAThread, Inc.

    SizesM3 – M30 · #5 – 1 1/4"

    The MAThread® family — licensed anti-cross-threading fasteners with lead-thread geometry that straightens misaligned engagement before first thread lock.

  5. A.5 Close-up of black and zinc-plated thread-forming screws arranged in a circle with the thread ends toward the centre

    Magform®

    TypeThread-forming for magnesium

    LicensorAcument®

    SizesM3 – M12 · #5 – 1/2"

    Licensed thread-forming fastener for magnesium die-cast components — 105° thread geometry forms strong threads via compressive action without cutting or debris.

  6. A.6 Close-up of five clinch studs in black, yellow-zinc and zinc finishes, showing the ribbed underside of the heads

    Strux®

    TypeClinch studs for non-weldable assemblies

    LicensorAcument®

    SizesM3 – M30 · #5 – 1 1/4"

    Licensed clinch stud — displacement-collar geometry locks the stud into sheet material without welding, staking, or pre-drilled threads.

Family comparison

What it is/range/licensor

FamilyWhat it isSizesMaterialLicensor
Torx® · Torx Plus® · Autosert®Drive systems for threaded fastenersM1 – M30 · #0 – 1 1/4"Carbon steel, alloy steel, or stainless steel — or to customer specification.Acument®
Delta PT® · Duro PT® · PT®Thread-forming screws for plasticsM1 – M16 · #0 – 5/8"Case-hardened carbon steel, alloy steel, or stainless steel — or to customer specification.EJOT®
Taptite II® · Taptite 2000® · Duo-Taptite® · Remform® · Plastite® · Kleerlok® · Powerlok®Thread-forming screwsM2 – M16 · #2 – 5/8"Case-hardened carbon steel or alloy steel (standard for REMINC thread-forming); stainless or custom material per project.Research Engineering & Manufacturing, Inc. (REMINC)
MAThread® · MATpoint®Anti-cross-threading fastenersM3 – M30 · #5 – 1 1/4"Case-hardened carbon steel, alloy steel, stainless steel, or customer-specified material.MAThread, Inc.
Magform®Thread-forming for magnesiumM3 – M12 · #5 – 1/2"Case-hardened carbon steel, alloy steel, stainless steel, or customer-specified material.Acument®
Strux®Clinch studs for non-weldable assembliesM3 – M30 · #5 – 1 1/4"Case-hardened carbon steel, alloy steel, or stainless steel — heat-treated to SAE grades / ISO classes.Acument®

Trademark notice Torx®, Torx Plus®, Autosert®, Magform® and Strux® are registered trademarks of Acument®. Delta PT®, Duro PT® and PT® are registered trademarks of EJOT®. Taptite II®, Taptite 2000®, Duo-Taptite®, Remform®, Plastite®, Kleerlok® and Powerlok® are registered trademarks of Research Engineering & Manufacturing Inc. MAThread® and MATpoint® are registered trademarks of MAThread, Inc. All trademarks belong to their respective owners. Way Fast supplies these products through licensed manufacturers and is not the owner, licensor or licensee of these marks. All trademarks

Questions buyers ask

3 answers

Q1
Which licensed families can be quoted?

All six: Torx® / Torx Plus®, Delta PT® / Duro PT®, Taptite II®, MAThread® / MATpoint®, Magform® and Strux® studs.

Q2
Which documents can be supplied with licensed fasteners?

PPAP documentation up to Level 3 (the complete submission package), prepared to the level your programme requires. IMDS entries are created by Way Fast on request. RoHS / REACH documentation per customer programme. See Quality and compliance.

Q3
What do you need for a quotation?

Send your drawing, the licensor's part reference or the fastener specification, with quantity. We match it to a licensed manufacturer and return a quotation within 7–14 business days from receipt of drawing and specifications. Request a quote.

Why source through Way Fast

Quality & compliance

  1. 01

    Multi-source capacity

    Several qualified makers per part family

    Working with multiple qualified manufacturing partners — we match each order to the best-fit production line, stabilizing lead times and cost when single-source capacity tightens.

  2. 02

    Submission-grade documentation

    PPAP Levels 1–3 · IMDS · RoHS / REACH

    Full support for PPAP (Levels 1–3), IMDS submission, and RoHS / REACH documentation.

  3. 03

    Audited special-process chain

    CQI-9 · CQI-11 · CQI-12 partners

    Partners certified to AIAG CQI-9 (heat treat), CQI-11 (plating), and CQI-12 (coating) — covering the full post-processing chain under audited special-process controls.

  4. 04

    Multilingual drawing review

    English · German · Japanese · Chinese

    Technical drawing review in English, German, Japanese, and Chinese — including ISO 8015 GPS callouts, JIS standards, thread tolerance classes, and coating specifications.

Request for quotation

Need a licensed fastener to drawing?

Send your drawing, the licensor's part reference or the fastener specification, with quantity. We match it to a licensed manufacturer and return a quotation.

Request a quote
  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH

Prefer e-mail or phone? [email protected] · +886-6-295-8228

Request a quote

Inquiry list 0

No products on your list yet.

Add products from the catalogue to request them together — or send a drawing or part reference without choosing a product.

Browse 34 products

0 items
Request a quote

Quotation within 7–14 business days from receipt of drawing and specifications. ISO 9001:2015 · PPAP Levels 1–3 · IMDS · RoHS / REACH.