Screws, bolts & studsE.1
SEMS
Screw-and-washer assemblies — machine screws shipped with one or more captive washers pre-assembled under the head.
Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272
+886-6-295-8228Group E/12 products
The twelve external threaded families in our range: SEMS, hex flange bolts, clinch studs, knurl bolts, shoulder bolts, open-die bolts, micro screws, stainless steel bolts, tapping screws, lamp and lighting fasteners, weld studs and plastic screws.
Supplied through qualified manufacturing partners to DIN / ISO / JIS standards or customer drawing, with strength class, coating and documentation matched per programme.
Previously listed as External Threaded Fasteners (externally threaded fasteners)


Screws, bolts & studsE.1
Screw-and-washer assemblies — machine screws shipped with one or more captive washers pre-assembled under the head.
Screws, bolts & studsE.2
Hex head bolts with integrated flange
Screws, bolts & studsE.3
Clinch studs lock into sheet metal without welding
Screws, bolts & studsE.4
The knurl pattern press-fits into an unthreaded hole and creates retention without tapped threads, heat-staking, or secondary fastening.
Screws, bolts & studsE.5
Bolts with an unthreaded precision shoulder between the head and the threaded portion
Screws, bolts & studsE.6
Cold-formed bolts with custom head geometry pressed directly from an open die
Screws, bolts & studsE.7
Sub-M2 precision screws — manufactured to thread tolerance classes below standard cold-heading output
Screws, bolts & studsE.8
Full-range stainless-steel bolts across austenitic, ferritic, martensitic, and precipitation-hardening grades
Screws, bolts & studsE.9
Self-tapping and thread-forming screws for sheet metal, plastic, and cast materials
Screws, bolts & studsE.10
Specialty fasteners for lighting and lamp housing assemblies
Screws, bolts & studsE.11
Stud-welded fasteners — fused to base metal via arc or capacitor-discharge welding.
Screws, bolts & studsE.12
Thermoplastic-body fasteners — polymer thread, head, and drive formed from engineering plastic.
Product video
A short product introduction from the Way Fast YouTube channel.
| Product | Sizes | Material | Finishes |
|---|---|---|---|
| SEMS | M1.4 – M20 · #0 – 3/4" | Carbon steel, alloy steel, stainless steel, or brass — or to customer specification. | Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, or to customer specification. |
| Hex Flange Bolts | M5 – M30 · #10 – 1 1/4" | Medium-carbon steel or alloy steel (quenched and tempered to property class). Stainless steel (A2 / A4) per customer specification. | Phosphate-and-oil, zinc, zinc flake (Dacromet®, Geomet®), zinc-nickel, Delta-Seal®, black oxide, or to customer specification. |
| Clinch Studs | M3 – M30 · #5 – 1 1/4" | Case-hardened carbon steel, alloy steel, or stainless steel — heat-treated to SAE grades / ISO classes. | Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, or to customer specification. |
| Knurl Bolts | M3 – M16 · #5 – 5/8" | Carbon steel, alloy steel, or stainless steel — per customer specification. | Zinc, zinc-nickel, black oxide, nickel, or to customer specification. |
| Shoulder Bolts | M3 – M16 · #5 – 5/8" | Carbon steel, alloy steel, or stainless steel — per customer specification. | Zinc, zinc-nickel, black oxide, nickel, or per drawing. |
| Open-Die Bolts | M3 – M20 · #5 – 3/4" | Medium-carbon steel, alloy steel, or stainless steel — per customer specification. | Zinc, zinc flake (Dacromet®, Geomet®), zinc-nickel, Delta-Seal®, black oxide, or to customer specification. |
| Micro Screws | M0.8 – M2 · #000 – #2 | Stainless steel (304 / 316), brass with nickel plating, or carbon steel — per customer specification. | Passivated (SS), nickel plated, zinc plated, black oxide, or to customer specification. |
| Stainless Steel Bolts | M1.2 – M25 · #000 – 1" | SUS 302, 304, 305, 316, 410, 420, 430, 630 (17-4 PH) — standard stock; custom grades per customer specification. | Passivation (ASTM A967) standard; electropolishing, nickel plating, or custom finish per drawing. |
| Tapping Screws | M2 – M10 · #4 – 3/8" | Carbon steel (case-hardened), alloy steel, or stainless steel — per customer specification. | Zinc, zinc-nickel, black oxide, Delta-Seal®, Geomet®, or to customer specification. |
| Lamp / Lighting Fasteners | M2 – M8 · #4 – 5/16" | Carbon steel, alloy steel, stainless steel (304 / 316), or brass — per customer specification. | Zinc, zinc-nickel, nickel plating, black oxide, or heat-resistant coating per customer specification. |
| Weld Studs | M3 – M16 · #5 – 5/8" | Low-carbon steel, alloy steel, or stainless steel (304 / 316) — per customer specification. | Bare steel, copper flash, zinc plating, GM 6076M, or to customer specification. |
| Plastic Screw | M2 – M10 · #4 – 3/8" | Nylon 6/6 or Polycarbonate (PC) standard catalog grades only. Engineering polymers (PEEK, PPS, POM, PVDF) are not part of Way Fast standard supply — recommended alternative sourcing for those grades. | Natural polymer color (white, black, natural amber); custom color per programme. |
Several qualified makers per part family
Working with multiple qualified manufacturing partners — we match each order to the best-fit production line, stabilizing lead times and cost when single-source capacity tightens.
PPAP Levels 1–3 · IMDS · RoHS / REACH
Full support for PPAP (Levels 1–3), IMDS submission, and RoHS / REACH documentation.
CQI-9 · CQI-11 · CQI-12 partners
Partners certified to AIAG CQI-9 (heat treat), CQI-11 (plating), and CQI-12 (coating) — covering the full post-processing chain under audited special-process controls.
English · German · Japanese · Chinese
Technical drawing review in English, German, Japanese, and Chinese — including ISO 8015 GPS callouts, JIS standards, thread tolerance classes, and coating specifications.
Request for quotation
Send the drawing or standard, material, strength class, finish and quantity. We match it to the best-fit manufacturer and return a quotation.
Prefer e-mail or phone? [email protected] · +886-6-295-8228