Screws, bolts & studsE.2
Hex Flange Bolts
Hex head bolts with integrated flange
Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272
+886-6-295-8228Stainless steel bolts — 300 / 400 series & precipitation-hardening grades
Full-range stainless-steel bolts across austenitic, ferritic, martensitic, and precipitation-hardening grades — matched to the corrosion, strength, magnetic, and machinability requirement of each application.
Baseline grades (304 / 316 / 410) in common head and length combinations ready within standard lead time; custom specs (thread class, head geometry, hardness treatment, non-standard grades) supplied per programme. Specifications to JIS, ANSI, ISO, B.S., or DIN.
Summary of the range stated on this page. Parts are produced to customer drawing or standard — full specifications.


| Sizes | M1.2 – M25 · #000 – 1" |
|---|---|
| Lengths | 2 – 250 mm · 1/16" – 10" |
| Material | SUS 302, 304, 305, 316, 410, 420, 430, 630 (17-4 PH) — standard stock; custom grades per customer specification. |
| Finishes | Passivation (ASTM A967) standard; electropolishing, nickel plating, or custom finish per drawing. |
| Head types | Hex, socket, pan, flat, button, countersunk, truss, or per drawing. |
| Drive | Phillips, Pozidriv, Torx®, slotted, hex socket, external hex, or per drawing. |
Also known asStainless steel bolts, SS bolts, 304 bolts, 316 bolts, 410 bolts, 17-4 PH bolts
302 / 304 / 305 / 316 · non-magnetic
Standard corrosion-resistant grades, non-magnetic, good formability. 304 for general-purpose; 316 for marine, chlorinated, or chemical environments; 305 for cold-heading larger bolts where 304 would work-harden; 302 for high-strength fasteners.
410 / 420 / 430 · higher strength
Magnetic stainless grades. 410 / 420 heat-treatable martensitic — higher tensile strength than 304 with moderate corrosion. 430 ferritic for cost-balanced applications where non-magnetic response is not required.
High strength + corrosion
17-4 PH combines austenitic corrosion with martensitic strength after age-hardening. Tensile above 1,200 MPa achievable. For aerospace, marine, or aggressive environments where 300-series strength is insufficient.
Grade selection and stock availability
Grade selection matched to environment (marine / chlorinated / food contact / chemical / magnetic sensitivity) and strength requirement — drawing-reviewed against customer environmental spec. Baseline 304 / 316 / 410 in common head-and-length combinations supplied within standard lead time; non-standard grades (305, 420, 430, 630 / 17-4 PH) and custom combinations supplied per programme.
Standard and custom stainless-steel fasteners supplied through qualified manufacturing partners. PPAP / IMDS / RoHS / REACH documentation per customer program.
Send your drawing, grade spec, and quantity (small batches welcome) — baseline grades quoted against standard lead time; custom specs and non-standard grades quoted per programme. Request a quote
Screws, bolts & studsE.2
Hex head bolts with integrated flange
Screws, bolts & studsE.7
Sub-M2 precision screws — manufactured to thread tolerance classes below standard cold-heading output
Screws, bolts & studsE.1
Screw-and-washer assemblies — machine screws shipped with one or more captive washers pre-assembled under the head.
Turned & formedD.6
Precision and specialty stainless-steel balls and beads