Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272

+886-6-295-8228

Group C/4 products/Featured

Washers, rings & seals

Washers and springs to DIN / ISO or customer drawing, and bonded sealing washers — a metal washer bonded with an elastomer ring — together with retaining rings and rubber or plastic components.

Supplied through qualified manufacturing partners, with washer type, elastomer and ring configuration matched to the application and the documentation each programme requires.

  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH
Pile of flat, wave, conical and serrated washers in zinc, yellow-zinc, black and plain finishes
Fig. 1Flat, wave and conical washers
Way Fast catalogue, page 5: hex nylon-insert lock nuts, retaining rings, washers and spring washers
Fig. 2Catalogue, p. 5 — lock nuts, retaining rings, washers

Lead products

Featured

Pile of flat, wave, conical and serrated washers in zinc, yellow-zinc, black and plain finishes
Flat, wave and conical washers

Washers and spring components — metal and polymer grades

Washer and Spring

Full-range washers and spring components — flat, spring-lock, conical, tooth-lock, cup, flange, finish washers, spring pins, and nut springs. Metal and polymer grades across automotive, industrial, and consumer-product programmes.

Sizes
M1.6 – M30 washer ID · #0 – 1-1/4" · per DIN / ISO / JIS standard or customer print
Material
Carbon steel, alloy steel, stainless steel (A2 / A4), aluminum, copper, bronze, silicon bronze, EPDM, NBR, silicone, or other polymer — per customer specification.
Finishes
Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, anodized (aluminum), passivation (SS), natural polymer color, or to customer specification.
Product sheet
  1. Washer and Spring · 1

    Flat / Plain Washers — DIN 125 / ISO 7089

    General purpose · bearing distribution

    Bearing-distribution washers to DIN 125 / ISO 7089 / JIS B1256 standards. Standard choice under bolt heads and nuts for load distribution, surface protection, and bearing compensation.

  2. Washer and Spring · 2

    Spring / Lock Washers

    Split lock · conical (Belleville) · tooth

    Spring action washers including split-ring lock (DIN 127 / 7980), conical spring (Belleville DIN 6796), internal / external tooth lock (DIN 6798). Anti-loosening under vibration and cyclic loading.

  3. Washer and Spring · 3

    Specialty Metal Washers

    Cup · flange · finish

    Metal cup washers, flange washers, finish washers, and top serration conical washers for bearing distribution, aesthetic retention, or panel-specific geometry.

  4. Washer and Spring · 4

    Rubber / Polymer Washers

    Sealing · cushioning · isolation

    EPDM, silicone, NBR, or natural rubber washers for sealing, vibration isolation, and cushioning applications. Polymer grade matched per chemical exposure and temperature range. Bonded metal-rubber variants supplied via the Bonded and Rubber Washer product page.

  5. Washer and Spring · 5

    Spring Components

    Spring pins · nut springs · coil

    Spring pins (slotted / coiled per ISO 8752 / 8750), nut springs for accessory retention, and related spring hardware per customer drawing.

Sealing washers with metal faces bonded to black or grey rubber, in flat and domed shapes
Bonded sealing washers — flat and domed

Bonded sealing washers and rubber washers for weather-tight assembly

Bonded and Rubber Washer

Composite sealing washers — metal outer washer bonded (vulcanized) with an EPDM, Neoprene, or NBR elastomer ring, creating a self-sealing fastener interface. Also pure rubber washers for cushioning, vibration isolation, and non-bonded sealing.

Sizes
M3 – M16 bolt size · #5 – 5/8"
Material
Metal backing: galvanized steel, stainless steel (304 / 316), aluminum, copper. Elastomer: EPDM, Neoprene (CR), NBR, silicone, natural rubber — per customer specification.
Finishes
Galvanized (metal backing), passivation (SS), anodization (aluminum), natural rubber color or custom-compounded per programme.
Product sheet
  1. Bonded and Rubber Washer · 1

    Bonded Sealing Washer

    Metal + vulcanized elastomer

    Steel or aluminum outer washer with elastomer ring vulcanized to the ID. Self-sealing when compressed under a bolt head — used on industrial roofing, automotive body panels, and weather-sensitive sheet-metal joints.

  2. Bonded and Rubber Washer · 2

    Pure Rubber Washer

    Cushioning · vibration · gasket

    Non-bonded rubber washer in EPDM, Neoprene, NBR, silicone, or natural rubber. Used for vibration isolation, component cushioning, gasket replacement, and non-critical sealing.

  3. Bonded and Rubber Washer · 3

    Specialty Elastomers

    EPDM / Neoprene / NBR / silicone

    Elastomer grade selected per environmental exposure — EPDM (UV, ozone, weather), Neoprene (chemical, ozone), NBR (oil, fuel), silicone (high-temperature), natural rubber (general cushioning). Custom compound per programme.

Products in this group

4 products

Washers & sealsC.1

Washer and Spring

Full-range washers and spring components — flat, spring-lock, conical, tooth-lock, cup, flange, finish washers, spring pins, and nut springs.

Washers & sealsC.2

Bonded and Rubber Washer

Composite sealing washers — metal outer washer bonded (vulcanized) with an EPDM, Neoprene, or NBR elastomer ring, creating a self-sealing fastener interface.

Washers & sealsC.3

Retaining Rings

Axial retention rings for shaft or bore applications

Washers & sealsC.4

Rubber and Plastic Component

Custom-molded rubber-metal components — bushings, vibration isolators, engine mounts, suspension bumpers, hydraulic mounts, gaskets, and impeller assemblies

Range at a glance

Sizes/material/finishes

ProductSizesMaterialFinishes
Washer and SpringM1.6 – M30 washer ID · #0 – 1-1/4" · per DIN / ISO / JIS standard or customer printCarbon steel, alloy steel, stainless steel (A2 / A4), aluminum, copper, bronze, silicon bronze, EPDM, NBR, silicone, or other polymer — per customer specification.Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, anodized (aluminum), passivation (SS), natural polymer color, or to customer specification.
Bonded and Rubber WasherM3 – M16 bolt size · #5 – 5/8"Metal backing: galvanized steel, stainless steel (304 / 316), aluminum, copper. Elastomer: EPDM, Neoprene (CR), NBR, silicone, natural rubber — per customer specification.Galvanized (metal backing), passivation (SS), anodization (aluminum), natural rubber color or custom-compounded per programme.
Retaining Rings3 – 300 mm shaft / bore diameter · 1/8" – 12"Carbon spring steel (baseline, standard catalog), stainless steel (304 / 316 for corrosion applications) — per customer specification.Phosphate-and-oil (standard for spring steel), black oxide, zinc, or passivation (SS) per specification.
Rubber and Plastic ComponentCustom per drawing — bushing OD from ~5 mm to vehicle-scale engine mount assemblies.Elastomer: EPDM, Neoprene (CR), NBR, silicone, natural rubber, SBR per application. Plastic: engineering thermoplastics (Nylon, POM, PC, TPU) per specification. Metal reinforcement: steel, aluminum, stainless.Natural rubber color or custom-compounded; painted, plated, or anodized metal reinforcement per specification.

Why source through Way Fast

Quality & compliance

  1. 01

    Multi-source capacity

    Several qualified makers per part family

    Working with multiple qualified manufacturing partners — we match each order to the best-fit production line, stabilizing lead times and cost when single-source capacity tightens.

  2. 02

    Submission-grade documentation

    PPAP Levels 1–3 · IMDS · RoHS / REACH

    Full support for PPAP (Levels 1–3), IMDS submission, and RoHS / REACH documentation.

  3. 03

    Audited special-process chain

    CQI-9 · CQI-11 · CQI-12 partners

    Partners certified to AIAG CQI-9 (heat treat), CQI-11 (plating), and CQI-12 (coating) — covering the full post-processing chain under audited special-process controls.

  4. 04

    Multilingual drawing review

    English · German · Japanese · Chinese

    Technical drawing review in English, German, Japanese, and Chinese — including ISO 8015 GPS callouts, JIS standards, thread tolerance classes, and coating specifications.

Request for quotation

Looking for washers or sealing parts?

Send the standard or drawing, material or elastomer, finish and quantity. We match it to the best-fit manufacturer and return a quotation.

Request a quote
  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH

Prefer e-mail or phone? [email protected] · +886-6-295-8228

Request a quote

Inquiry list 0

No products on your list yet.

Add products from the catalogue to request them together — or send a drawing or part reference without choosing a product.

Browse 34 products

0 items
Request a quote

Quotation within 7–14 business days from receipt of drawing and specifications. ISO 9001:2015 · PPAP Levels 1–3 · IMDS · RoHS / REACH.