Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272

+886-6-295-8228

Group D/6 products/Featured

Turned & formed parts

Precision CNC-turned parts to customer drawing, together with dowel pins, brass inserts, die-cast and powder-metal products, rivets and stainless steel beads.

Supplied through qualified manufacturing partners, with the production process selected per programme and tolerances reviewed against the customer drawing.

  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH
Turned parts in polished steel, aluminium and brass: fittings, nozzles, threaded sleeves and connectors
Fig. 1Turned fittings, nozzles and connectors
Way Fast catalogue, page 6: turned, stamped and die-cast parts, pins, washers and special screws
Fig. 2Catalogue, p. 6 — turned and stamped parts, washers

Lead product

Featured

Turned parts in polished steel, aluminium and brass: fittings, nozzles, threaded sleeves and connectors
Turned fittings, nozzles and connectors

Precision CNC-turned components across multiple applications

Turning Products

Precision CNC-turned parts — shafts, pins, sleeves, inserts, connectors, pipe fittings, and machine components produced by single-point turning on Swiss-type, CNC lathe, or multi-spindle equipment to customer drawing.

Sizes
0.5 – 250 mm diameter · 0.020" – 10"
Lengths
1.5 – 800 mm · 1/16" – 32"
Material
Carbon steel, alloy steel (heat-treatable grades), stainless steel (304 / 316 / 17-4 PH), brass, copper, aluminum — per customer specification.
Finishes
Machined as-is (Ra per drawing), zinc, zinc-nickel, nickel plating, black oxide, passivation (SS), anodization (aluminum), or to customer specification.
Product sheet
  1. Turning Products · 1

    Shafts, Pins, Axles

    Rotating / alignment components

    Cylindrical precision components — motor shafts, alignment pins, guide axles, drive shafts. Ground OD where bearing fit is required; hardened or case-hardened for wear applications.

  2. Turning Products · 2

    Sleeves, Bushings, Inserts

    Bearing surfaces · threaded inserts

    Plain bearing sleeves, guide bushings, internally-threaded inserts (brass or steel — dedicated Brass Insert page available for threaded brass inserts). Machined from tube or bar stock with ID / OD concentricity matched per drawing.

  3. Turning Products · 3

    Connectors & Pipe Fittings

    Fluid · electrical · mechanical joints

    Brass and stainless pipe fitting bodies, fluid line connectors, threaded nipples, compression fittings, and electrical / grounding connectors per customer drawing.

  4. Turning Products · 4

    Precision Components

    Optical · electronic · machine parts

    Miniature or tight-tolerance components — optical fiber link accessories, precision electronic housings, machine parts with critical tolerances on diameter, thread, or concentricity. Swiss-type precision turning where IT6–IT7 class tolerances are required.

Products in this group

6 products

Turned & formedD.1

Turning Products

Precision CNC-turned parts — shafts, pins, sleeves, inserts, connectors, pipe fittings, and machine components

Turned & formedD.2

Dowel Pins

Precision cylindrical pins for component alignment, positioning, pivot axes, and shear-load retention in assembly, fixture, and tooling applications.

Turned & formedD.3

Brass Inserts

Threaded brass inserts — installed into plastic housings to create a permanent metal thread in thermoplastic or thermoset substrates.

Turned & formedD.4

Die Casting / Powder Metal Products

Non-fastener metal components produced by die casting (aluminum, zinc, magnesium alloy) or powder metallurgy (iron, steel, copper, nickel alloys)

Turned & formedD.5

Rivet

Permanent mechanical fasteners installed by deforming a body or mandrel — retention without threads, welding, or adhesives.

Turned & formedD.6

Stainless Steel Bead

Precision and specialty stainless-steel balls and beads

Range at a glance

Sizes/material/finishes

ProductSizesMaterialFinishes
Turning Products0.5 – 250 mm diameter · 0.020" – 10"Carbon steel, alloy steel (heat-treatable grades), stainless steel (304 / 316 / 17-4 PH), brass, copper, aluminum — per customer specification.Machined as-is (Ra per drawing), zinc, zinc-nickel, nickel plating, black oxide, passivation (SS), anodization (aluminum), or to customer specification.
Dowel Pins1.5 – 20 mm pin diameter · 1/16" – 3/4"Hardened tool steel (ISO 8734), low-carbon steel (ISO 2338), stainless steel (304 / 316), or spring steel (ISO 8752) — per specification.Bright (ground surface), phosphate, black oxide, nickel plating, or passivation (SS) per specification.
Brass InsertsM2 – M12 thread · #2 – 1/2"Brass C3604 (free-cutting, lead-bearing), C3600-series low-lead brass, or alternative copper-alloy grades per customer specification.Natural brass (as-machined), nickel plated, tin plated, or to customer specification.
Die Casting / Powder Metal ProductsCustom per drawing — die cast part size limited by press tonnage; PM part size limited by compaction equipment.Die casting: aluminum alloy (A380, ADC12), zinc alloy (ZAMAK 3 / 5), magnesium alloy. Powder metal: iron, carbon steel, iron-copper, iron-nickel, prealloyed steel, diffusion-alloyed steel, stainless steel 300 / 400 series, copper alloy, soft-magnetic alloy — per customer specification.As-cast (die cast: vibratory deburr optional); as-sintered (PM: oil impregnation, steam treatment, or secondary machining); plating (zinc, zinc-nickel, nickel) or coating per customer specification.
RivetBody diameter 2 – 8 mm · 1/16" – 5/16"Aluminum, low-carbon steel, stainless steel, brass, or copper — per customer specification.Natural, anodized (aluminium), zinc plated, black oxide, color coded, or to customer specification.
Stainless Steel Bead0.5 – 25 mm ball diameter · 0.020" – 1"AISI 440C (hardened, for bearing applications), 304, 316 stainless — per customer specification.Precision ground and polished per ISO 3290 grade specification; passivation per ASTM A967.

Why source through Way Fast

Quality & compliance

  1. 01

    Multi-source capacity

    Several qualified makers per part family

    Working with multiple qualified manufacturing partners — we match each order to the best-fit production line, stabilizing lead times and cost when single-source capacity tightens.

  2. 02

    Submission-grade documentation

    PPAP Levels 1–3 · IMDS · RoHS / REACH

    Full support for PPAP (Levels 1–3), IMDS submission, and RoHS / REACH documentation.

  3. 03

    Audited special-process chain

    CQI-9 · CQI-11 · CQI-12 partners

    Partners certified to AIAG CQI-9 (heat treat), CQI-11 (plating), and CQI-12 (coating) — covering the full post-processing chain under audited special-process controls.

  4. 04

    Multilingual drawing review

    English · German · Japanese · Chinese

    Technical drawing review in English, German, Japanese, and Chinese — including ISO 8015 GPS callouts, JIS standards, thread tolerance classes, and coating specifications.

Request for quotation

Have a turned part to quote?

Send the drawing with material, tolerances, finish and annual volume. We select the process and the manufacturer per programme and return a quotation.

Request a quote
  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH

Prefer e-mail or phone? [email protected] · +886-6-295-8228

Request a quote

Inquiry list 0

No products on your list yet.

Add products from the catalogue to request them together — or send a drawing or part reference without choosing a product.

Browse 34 products

0 items
Request a quote

Quotation within 7–14 business days from receipt of drawing and specifications. ISO 9001:2015 · PPAP Levels 1–3 · IMDS · RoHS / REACH.