Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272

+886-6-295-8228

Group B/6 products/Featured

Nuts

Non-standard and custom-geometry nuts — cold-headed, hot-forged, machined, and stamped configurations supplied to customer drawing across automotive, industrial, and electronic programmes.

Alongside special nuts we supply lock nuts, weld nuts, blind rivet nuts, hex flange nuts and conical nuts through qualified manufacturing partners, with the manufacturing process matched to the nut geometry, thread specification, annual volume and tolerance requirement.

Previously listed as Internal Threaded Fasteners (internally threaded fasteners)

  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH
Special nuts in plain and zinc finishes: sleeve nuts, round and flanged nuts, a winged nut and a knurled flange nut
Fig. 1Special nuts — turned and formed shapes
Way Fast catalogue, page 3: hex, flange, weld, conical and lock nuts and special nuts to print
Fig. 2Catalogue, p. 3 — nuts

Lead product

Featured

Special nuts in plain and zinc finishes: sleeve nuts, round and flanged nuts, a winged nut and a knurled flange nut
Special nuts — turned and formed shapes

Custom-configured special nuts — cold / hot forged, machined, and stamped

Special Nuts

Non-standard and custom-geometry nuts — cold-headed, hot-forged, machined, and stamped configurations supplied to customer drawing across automotive, industrial, and electronic programmes.

Sizes
M3 – M30 · #4 – 1-1/4"
Material
Carbon steel, alloy steel (heat-treated grades 8 / 10 / 12), stainless steel (A2 / A4), or aluminium alloy (specific applications) — per customer specification.
Finishes
Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, passivation (SS), or to customer specification.
Product sheet
  1. Special Nuts · 1

    Cold-heading

    Mass production · standard grades

    Cold-headed nuts for high-volume commodity configurations. Grain flow continuous through the part, faster throughput than machining, lower material waste. Standard DIN / ISO / JIS hex and flanged profiles across automotive and industrial applications.

  2. Special Nuts · 2

    Hot-forging

    Large sizes · high-strength grades

    Hot-forged nuts for sizes and property classes beyond cold-heading feasibility — typically above M24 or class 10 / 12 grades requiring temperature-controlled grain alignment. Used in chassis, heavy-equipment, and high-load structural joints.

  3. Special Nuts · 3

    Turning (CNC machining)

    Tight tolerance · custom geometry

    CNC-turned nuts for tight-tolerance or geometrically-complex configurations — special OD profiles, undercuts, integrated sealing faces, or small-volume prototype / pre-production runs. Supplied in carbon, alloy, stainless, brass, and aluminium-alloy grades.

  4. Special Nuts · 4

    Stamping

    Thin-profile · high-volume sheet nuts

    Progressive-die stamped nuts for thin-profile configurations — square nuts, keps-type plate nuts, sheet-metal retainers. High throughput on standard profiles; supplied in carbon and stainless sheet grades.

Products in this group

6 products

NutsB.1

Special Nuts

Non-standard and custom-geometry nuts — cold-headed, hot-forged, machined, and stamped configurations supplied to customer drawing

NutsB.2

Lock Nuts

Prevailing-torque nuts — nylon-insert, all-metal distorted-thread, and K-lock designs.

NutsB.3

Hex Flange Nuts

Hex nuts with integrated flange

NutsB.4

Blind Rivet Nuts

Internally-threaded rivet fasteners — installed from one side of a panel to create a permanent threaded boss in sheet metal, aluminum, or plastic substrate

NutsB.5

Weld Nuts

Resistance-welded nuts — fused to sheet metal via projection welding

NutsB.6

Conical Nuts

Nuts with a conical (tapered) body or seat geometry

Product video

Internal threaded fasteners

A short product introduction from the Way Fast YouTube channel.

All product videos

Video 3Internal threaded fastenersYouTube

Range at a glance

Sizes/material/finishes

ProductSizesMaterialFinishes
Special NutsM3 – M30 · #4 – 1-1/4"Carbon steel, alloy steel (heat-treated grades 8 / 10 / 12), stainless steel (A2 / A4), or aluminium alloy (specific applications) — per customer specification.Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, passivation (SS), or to customer specification.
Lock NutsM2 – M30 · 3/16" – 1-1/4"Low-carbon steel, medium-carbon steel (property class 8 / 10 for all-metal grades), stainless steel (A2 / A4), or brass — per customer specification.Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, or to customer specification.
Hex Flange NutsM3 – M30 · #4 – 1-1/4"Medium-carbon steel (cold-headed, heat-treated for class 8 / 10), stainless steel (A2 / A4), or brass — per customer specification.Zinc, zinc flake (Dacromet®, Geomet®), zinc-nickel, Delta-Seal®, phosphate-and-oil, black oxide, or to customer specification.
Blind Rivet NutsM3 – M12 · #4 – 1/2"Carbon steel, alloy steel, stainless steel (A2 / A4), or aluminium alloy — per customer specification.Zinc, zinc-nickel, Delta-Seal®, Geomet®, passivation (SS), anodization (aluminium), or to customer specification.
Weld NutsM5 – M16 · #10 – 5/8"Low-carbon steel (for weldability), alloy steel, or stainless steel — per customer specification.Bare steel (improved weldability), copper flash, zinc (post-weld applications), or to customer specification.
Conical NutsM3 – M14 · #4 – 9/16"Carbon steel, alloy steel, or stainless steel — per customer specification.Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, or to customer specification.

Why source through Way Fast

Quality & compliance

  1. 01

    Multi-source capacity

    Several qualified makers per part family

    Working with multiple qualified manufacturing partners — we match each order to the best-fit production line, stabilizing lead times and cost when single-source capacity tightens.

  2. 02

    Submission-grade documentation

    PPAP Levels 1–3 · IMDS · RoHS / REACH

    Full support for PPAP (Levels 1–3), IMDS submission, and RoHS / REACH documentation.

  3. 03

    Audited special-process chain

    CQI-9 · CQI-11 · CQI-12 partners

    Partners certified to AIAG CQI-9 (heat treat), CQI-11 (plating), and CQI-12 (coating) — covering the full post-processing chain under audited special-process controls.

  4. 04

    Multilingual drawing review

    English · German · Japanese · Chinese

    Technical drawing review in English, German, Japanese, and Chinese — including ISO 8015 GPS callouts, JIS standards, thread tolerance classes, and coating specifications.

Request for quotation

Have a nut drawing?

Send your drawing with nut geometry, thread spec, material grade, property class, finish, and target annual volume — process selection and manufacturer matched per programme.

Request a quote
  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH

Prefer e-mail or phone? [email protected] · +886-6-295-8228

Request a quote

Inquiry list 0

No products on your list yet.

Add products from the catalogue to request them together — or send a drawing or part reference without choosing a product.

Browse 34 products

0 items
Request a quote

Quotation within 7–14 business days from receipt of drawing and specifications. ISO 9001:2015 · PPAP Levels 1–3 · IMDS · RoHS / REACH.