NutsB.3
Hex Flange Nuts
Hex nuts with integrated flange
Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272
+886-6-295-8228Prevailing-torque lock nuts for automotive structural and vibration joints
Prevailing-torque nuts — nylon-insert, all-metal distorted-thread, and K-lock designs. Lock feature prevents back-off under vibration and cyclic loading without thread-lock adhesive or secondary retention.
Broad specification coverage across DIN 982 (thin), DIN 985 (tall), DIN 6927 (all-metal prevailing-torque), JIS NE / NTE equivalents, and Keps / K-lock configurations — custom-configured per programme to customer drawing. Applications: automotive chassis, suspension, exhaust, engine accessories, and structural joints where continuous vibration or thermal cycling would loosen a standard hex nut.
Summary of the range stated on this page. Parts are produced to customer drawing or standard — full specifications.

Catalogue photographs at native size. Parts shown are examples; all production is to customer drawing.
| Sizes | M2 – M30 · 3/16" – 1-1/4" |
|---|---|
| Lengths | N/A — nut height per DIN / ISO / JIS specification. |
| Material | Low-carbon steel, medium-carbon steel (property class 8 / 10 for all-metal grades), stainless steel (A2 / A4), or brass — per customer specification. |
| Finishes | Zinc, zinc-nickel, Delta-Seal®, Geomet®, black oxide, nickel, or to customer specification. |
| Head types | N/A — nut form per DIN / ISO / JIS standard. |
| Drive | N/A — installation by standard torque wrench per thread specification. |
Also known asLock nuts, locknut, nylon insert lock nut, all-metal prevailing-torque nut, K-lock, Keps nut
Baseline · temperature-sensitive
Nylon ring insert grips screw threads. Standard for ambient to moderate-temperature service (~ −50°C to +120°C). DIN 985 thin for bulk structural fastening; DIN 982 tall for higher retention. Most common lock nut type supplied through Way Fast — custom-configured in low-carbon steel, stainless, or brass per programme.
High-temperature · re-usable
Distorted-thread all-metal lock nut, no polymer insert. For temperatures above 120°C (engine, exhaust, turbocharger) and applications requiring multiple re-uses without loss of prevailing torque. Supplied in property class 8 / 10 grade per programme.
Integrated tooth-lock washer · one-piece
Hex nut with captive external-tooth lock washer pre-assembled. Combines nut and washer in a single SKU, prevents loss and ensures consistent locking against flat bearing surfaces. Common on electrical enclosures, harness brackets, and general fastening.
Lock mechanism and torque retention
Lock mechanism (nylon insert for up to ~120°C, all-metal for high-temp / re-usable, K-lock for captive-tooth retention), material grade, and finish matched per torque spec and service environment — drawing-reviewed against customer retention torque and re-use requirements. Configurations supplied per programme; established partnerships with qualified lock-nut manufacturers across DIN / JIS / ISO standards.
Supplied through qualified manufacturing partners to DIN 982 / DIN 985 / DIN 6927 / DIN 6928 / JIS B1056 / ISO 7040 / ISO 10511 specifications. Custom-configured per programme with PPAP / IMDS / RoHS / REACH documentation.
Send your drawing, lock mechanism (nylon / all-metal / K-lock), thread spec, property class, and target volume — grade and finish custom-configured per programme drawing. Request a quote
NutsB.3
Hex nuts with integrated flange
NutsB.1
Non-standard and custom-geometry nuts — cold-headed, hot-forged, machined, and stamped configurations supplied to customer drawing
NutsB.6
Nuts with a conical (tapered) body or seat geometry
Washers & sealsC.1
Full-range washers and spring components — flat, spring-lock, conical, tooth-lock, cup, flange, finish washers, spring pins, and nut springs.