Way Fast International Co., Ltd. 威峯科技股份有限公司/Tainan, Taiwan/ISO 9001:2015 · BSI FS 571272

+886-6-295-8228

Products/34 products/5 groups

Fasteners and parts to drawing or standard

Search the range, add what you need to your inquiry list and send one request. Not listed? Most of our work is custom and special parts to customer drawing — send the print.

All products

All products — 34 products in 5 groups

Licensed fasteners

About this group

LicensedA.1

Torx® / Torx Plus®

The full Acument® Torx drive family — licensed recess geometries for threaded fasteners across metal assembly applications.

LicensedA.2

Delta PT® / Duro PT®

Thread-forming screws engineered for direct assembly into thermoplastic and thermoset substrates.

LicensedA.3

Taptite II®

Trilobular and specialty thread-forming screws licensed by Research Engineering & Manufacturing, Inc. (REMINC).

LicensedA.4

MAThread® / MATpoint®

Licensed anti-cross-threading fasteners with lead-thread geometry that straightens misaligned engagement before first thread lock.

LicensedA.5

Magform®

Licensed thread-forming fastener for magnesium die-cast components

LicensedA.6

Strux® Studs

Licensed clinch stud — displacement-collar geometry locks the stud into sheet material without welding, staking, or pre-drilled threads.

NutsB.1

Special Nuts

Non-standard and custom-geometry nuts — cold-headed, hot-forged, machined, and stamped configurations supplied to customer drawing

NutsB.2

Lock Nuts

Prevailing-torque nuts — nylon-insert, all-metal distorted-thread, and K-lock designs.

NutsB.3

Hex Flange Nuts

Hex nuts with integrated flange

NutsB.4

Blind Rivet Nuts

Internally-threaded rivet fasteners — installed from one side of a panel to create a permanent threaded boss in sheet metal, aluminum, or plastic substrate

NutsB.5

Weld Nuts

Resistance-welded nuts — fused to sheet metal via projection welding

NutsB.6

Conical Nuts

Nuts with a conical (tapered) body or seat geometry

Washers, rings & seals

About this group

Washers & sealsC.1

Washer and Spring

Full-range washers and spring components — flat, spring-lock, conical, tooth-lock, cup, flange, finish washers, spring pins, and nut springs.

Washers & sealsC.2

Bonded and Rubber Washer

Composite sealing washers — metal outer washer bonded (vulcanized) with an EPDM, Neoprene, or NBR elastomer ring, creating a self-sealing fastener interface.

Washers & sealsC.3

Retaining Rings

Axial retention rings for shaft or bore applications

Washers & sealsC.4

Rubber and Plastic Component

Custom-molded rubber-metal components — bushings, vibration isolators, engine mounts, suspension bumpers, hydraulic mounts, gaskets, and impeller assemblies

Turned & formed parts

About this group

Turned & formedD.1

Turning Products

Precision CNC-turned parts — shafts, pins, sleeves, inserts, connectors, pipe fittings, and machine components

Turned & formedD.2

Dowel Pins

Precision cylindrical pins for component alignment, positioning, pivot axes, and shear-load retention in assembly, fixture, and tooling applications.

Turned & formedD.3

Brass Inserts

Threaded brass inserts — installed into plastic housings to create a permanent metal thread in thermoplastic or thermoset substrates.

Turned & formedD.4

Die Casting / Powder Metal Products

Non-fastener metal components produced by die casting (aluminum, zinc, magnesium alloy) or powder metallurgy (iron, steel, copper, nickel alloys)

Turned & formedD.5

Rivet

Permanent mechanical fasteners installed by deforming a body or mandrel — retention without threads, welding, or adhesives.

Turned & formedD.6

Stainless Steel Bead

Precision and specialty stainless-steel balls and beads

Screws, bolts & studs

About this group

Screws, bolts & studsE.1

SEMS

Screw-and-washer assemblies — machine screws shipped with one or more captive washers pre-assembled under the head.

Screws, bolts & studsE.2

Hex Flange Bolts

Hex head bolts with integrated flange

Screws, bolts & studsE.3

Clinch Studs

Clinch studs lock into sheet metal without welding

Screws, bolts & studsE.4

Knurl Bolts

The knurl pattern press-fits into an unthreaded hole and creates retention without tapped threads, heat-staking, or secondary fastening.

Screws, bolts & studsE.5

Shoulder Bolts

Bolts with an unthreaded precision shoulder between the head and the threaded portion

Screws, bolts & studsE.6

Open-Die Bolts

Cold-formed bolts with custom head geometry pressed directly from an open die

Screws, bolts & studsE.7

Micro Screws

Sub-M2 precision screws — manufactured to thread tolerance classes below standard cold-heading output

Screws, bolts & studsE.8

Stainless Steel Bolts

Full-range stainless-steel bolts across austenitic, ferritic, martensitic, and precipitation-hardening grades

Screws, bolts & studsE.9

Tapping Screws

Self-tapping and thread-forming screws for sheet metal, plastic, and cast materials

Screws, bolts & studsE.10

Lamp / Lighting Fasteners

Specialty fasteners for lighting and lamp housing assemblies

Screws, bolts & studsE.11

Weld Studs

Stud-welded fasteners — fused to base metal via arc or capacitor-discharge welding.

Screws, bolts & studsE.12

Plastic Screw

Thermoplastic-body fasteners — polymer thread, head, and drive formed from engineering plastic.

Printed catalogue

6 pages
Way Fast catalogue, page 1: SEMS, hex nylon-insert lock nuts and special bolts and screws to print, with PPAP, IMDS and RoHS notes
p. 1
Way Fast catalogue, page 2: special bolts and screws to print, clinch studs, shoulder bolts and SEMS
p. 2
Way Fast catalogue, page 3: hex, flange, weld, conical and lock nuts and special nuts to print
p. 3
Way Fast catalogue, page 4: licensed fasteners supplied by licensee manufacturers
p. 4
Way Fast catalogue, page 5: hex nylon-insert lock nuts, retaining rings, washers and spring washers
p. 5
Way Fast catalogue, page 6: turned, stamped and die-cast parts, pins, washers and special screws
p. 6

Download the catalogue — PDF, 4.4 MB Edition 2022, 6 pages.

Product videos

4 videos

Request for quotation

Not in the list? Send the drawing.

Most of our work is custom and special parts to customer drawing. We review it, match it to the best-fit manufacturer in Taiwan and return a quotation.

Request a quote
  • Quote in 7–14 business days
  • ISO 9001:2015
  • PPAP L1–3
  • IMDS
  • RoHS / REACH

Prefer e-mail or phone? [email protected] · +886-6-295-8228

Request a quote

Inquiry list 0

No products on your list yet.

Add products from the catalogue to request them together — or send a drawing or part reference without choosing a product.

Browse 34 products

0 items
Request a quote

Quotation within 7–14 business days from receipt of drawing and specifications. ISO 9001:2015 · PPAP Levels 1–3 · IMDS · RoHS / REACH.